Volt'sŪ Brass Bully Shielded - MR16 Well Light
The Brass Bully Shielded is a very rugged, commercial grade outdoor lighting fixture. It is a completely sealed well light that uses an mr16 lamp. The socket is mounted on an adjustable gimbal so the lamp angle can be adjusted. The top is thick solid cast brass. The glass lens is flush with the top so water cannot puddle. The thick brass grate adds extra protection to the commercial quality glass lens. There is a thick rubber gasket between the top and body of the well light for a water tight seal. The lower canister is completely sealed -- the round lead wire uses a waterproof pressure fitting to insure water cannot enter from the bottom of the well light fixture. Great for any application where you don't want an above ground or protruding outdoor lighting fixture.
The glass lens is CLEAR (we changed from a frosted lens as pictured to a clear lens due to overwhelming requests by contractors).
VOLTŪ Brass Bully Shielded Features:
-Solid cast brass construction
-Completely water tight---pressure rubber gasket, rubber seal around wire exit.
-Hole measurement for installation: 3 1/2" diameter, 5 1/2" deep
-Choose from 48" standard or 25' hub ready 16G, SPT-2 premium tinned copper lead wire.
-Beryllium pre-dialectric greased socket.
-Silicon plug where lead wires exit fixture. Prevents ground moisture and insects from entering fixture.
-Lens flush with fixture so water cannot puddle.
-Clear lens for increased photometric results
-Low voltage 12 volts
-Requires VOLT'sŪ Low Voltage Transformer (Click HERE to view)
-VOLT'sŪ Lifetime Warranty