Home > News > VOLT Lighting Introduces Innovative Wire Connector for Landscape Lighting

Introducing the VOLT Pro Junction Hub

PRWEB | TAMPA, FLORIDA | OCTOBER 19, 2015

VOLT® Lighting announced today a new landscape lighting multi-wire connector, the “Pro Junction Hub”. The purpose of the device is to provide an improved method for connecting multiple lighting wires in a weatherproof enclosure.

Other junction hubs on the market use twist-on wire connectors that contain grease. Installing these can be messy and, once connected, cannot be taken apart. The VOLT® device uses non-greased terminal blocks. With these blocks, wires can be added or removed at any time after installation.

The VOLT® terminal blocks are attached to the inside of the enclosure. Constructed of individual wire clamps, installers open and close each one by depressing a small tab. No tools are needed.

Pro Junction Hub

Michael Breedlove, VOLT® Director of Innovation & Manufacturing, describes the reasons for developing the new Hub, “Landscape lighting wire connections have always been weak points in the system. Many are vulnerable to the elements and may corrode and lose integrity over time. Others use good connectors but have the downside of being encased in grease or heat shrink tubing – both types are messy and time-consuming to install.”

Breedlove continues, “When we decided to create a better hub connector, we identified several performance targets. They included ease and speed of installation, the ability to add and remove wires over time, and most important, lasting integrity of the connections. With our new hub, we succeeded in meeting all targets. We believe this new device is a significant advancement in the landscape lighting industry – both for professionals and determined do-it-yourselfers.”


View the Pro Junction Hub Product Page
Return to VOLT Lighting News
(Your shopping cart is empty)
Built with Volusion
Choose Your Options
1 of 1