Multi-Beam Filters Kit with LED MR16 Lamp | Low Voltage Landscape Lighting
A VOLT® MR16 Lamp (12º) with diffusion kit for 8 additional beam angles.
Like buying 9 lamps in one! One of the challenges of landscape lighting design is to predict the optimal beam angle before the fixture is installed. For this reason, many designers bring extra lamps to the job site - an expensive and hard-to-manage practice. Instead, bring this 12º LED lamp and the Multi-Beam Diffusion kit - change the beam angle without replacing the lamp.
New Micro-Lens Technology! Ordinary diffusion filters are highly inefficient because they scatter light in all directions. This new diffusion material is constructed with micro-lenses embedded in a clear material. The result is highly controlled diffusion with a minimal loss of light intensity.
Two Effects. Another feature of these filters is that they can be used in two orientations - with the microstructure (rough side) towards the lamp, or the microstructure facing away from the lamp. The former of these orientations is called the "Lamp Hiding Mode" the latter is the "Angle-Spreading" mode. The appearance of the two modes is slightly different and results in different beam angles.
Resulting Diffusion Angle Printed on Filter. When you start with this 12º LED MR16 lamp, the filters display an accurate prediction of the resulting beam angle. You will find this information printed along the edge of each filter (on both sides).
Start with any MR16 Lamp. The filters can be used with lamps of any beam angle. And, the resulting beam angle changes according to that. To find the resulting beam angles for any MR16 lamp, refer to the following chart.
View the Diffusion Angle Chart for Various Filters and MR16 Lamps.
The sturdy filter clip attaches directly to the lamp to hold the filter in place.
Q.Will this work with my fixture?
A.The Multi-Beam filters use a clip to mount onto the MR16 bulb itself to provide the effect. These are designed to work with LED MR16 lamps and work best with the 12º beam spread lamps.
Q.Each filter features two modes?
A.Each filter is doubled sided with one side widening the beam width and the other is a source hiding mode for hiding LEDs.
Q.Are these easy to install?
A.The clip snaps directly to the MR16 lamp.