The LED Brass Bully Shielded is an outdoor LED professional grade light fixture. Great for up lighting, deck lighting, and anything where a low profile outdoor LED light fixture is desired. Thick solid cast brass faceplate, pressure fitted rubber gasket betweem faceplate and canister for tight seal, rubber seal where wire exits fixture. Uses only professional grade internal components including a pre-dialectric greased beryllium socket. Clear lens and adjustable socket to acheive desired photometric results. VOLT's® Lifetime Warranty. The LED Brass Bully Open outdoor LED light is outfitted with a VOLT® LED mr16 lamp that is 80% more efficient than a halogen lamp AND lasts 8-10 times longer.  Energy savings and less maintenance—all while being green and utilizing the latest technology.  The light from VOLT’s® LED Brass Bully Open outdoor LED light fixture matches the exact look of a halogen in both color and brightness – you will not see a difference in light quality or effect between a halogen or this LED fixture.

What is the use of having a 20 year LED lamp if the fixture is not going to last that long?  That is why we suggest you stay away from short life aluminum fixtures and stick with solid cast brass when it comes to LED (or any outdoor lighting fixture).

See how much energy and money you can save by using LED. Use our LED Energy Savings Calculator.

VOLT® LED Brass Bully Shielded Features:

-Solid cast brass construction

-Completely water tight---pressure rubber gasket, rubber seal around wire exit.

-Hole measurement for installation: 3 1/2" diameter, 5 1/2" deep

-Choose from 48" standard or 25' hub ready 16G, SPT-2 premium tinned copper lead wire.

-Beryllium pre-dialectric greased socket.

-Silicon plug where lead wires exit fixture.  Prevents ground moisture and insects from entering fixture.

-Lens flush with fixture so water cannot puddle.

-Shield provides glare protection.

-Clear lens for increased photometric results

-Uses same canister as the Brass Bully Grate (LED-552), Brass Bully Beacon (LED-553), and Brass Bully Shielded (LED-554)

-Low voltage 10-15 volts

-Requires VOLT's® AC Magnetic Transformer (Sold Seperately, click HERE to view)

-VOLT's® Lifetime Warranty

IMPORTANT *** All VOLT® LED fixtures and retrofit bulbs must be used with magnetic transformers such as our VOLT® transformers (they are not compatible with electronic transformers). They must be used with AC (they are not compatible with DC voltage). Failure to comply with any of these factors so will destroy the fixture or lamp and void the warranty.