VOLTŪ Brass Bully Open- MR16 Well Light
The Brass Bully Open is a sealed outdoor lighting well light that uses an mr16 lamp. The socket is mounted on an adjustable gimbal so the lamp angle can be adjusted. The top is thick solid cast brass. The commercial outdoor lighting application glass lens is flush with the top so water cannot puddle. There is a thick rubber gasket between the top and body of the well light for a water tight seal. The lower canister is completely sealed -- the round lead wire uses a waterproof pressure fitting to insure water cannot enter from the bottom of the well light fixture. Great for any application where you don't want an above ground or protruding fixture.
The glass lens is CLEAR (we changed from a frosted lens as pictured to a clear lens due to overwhelming requests by contractors).
VOLTŪ Brass Bully Open Features:
-Solid brass faceplate
-Completely water tight: Pressure rubber gasket and rubber seal around wire exit.
-Beryllium copper socket more corrosion resistant than copper.
-Choose from 48" standard or 25' hub ready 16G, SPT-2 premium tinned copper lead wire.
-Clear lens for increased photometic results.
-Lens flush with fixture so water cannot puddle
-Complete water shedding and drainage off the lense.
-Low voltage, 12 volt AC
-Requires VOLT'sŪ AC Magnetic Transformer (Sold Seperately, click HERE to view)
-VOLT'sŪ Lifetime Warranty