The LED Max Spread is a high quality path/area outdoor light that easily lives up to its name.  Featuring a large 16' lighting diameter you'll easily save money by reducing the amount of area lights needed for your application. Large hat with a shallow angle and a tall stem brings this fixture out at 2', allowing better photometrics. Solid cast brass construction with pro-grade internal components and a lifetime warranty.  It is outfitted with a VOLT® LED Bi-Pin that is 80% more efficient than a halogen lamp AND lasts 8-10 times longer.  Energy saving, less maintenance, and equivalent to a halogen in brightness and color—all while being green and utilizing the latest in LED technology.

What is the use of having a 20 year LED lamp if the fixture is not going to last that long?  That is why we suggest you stay away from short life aluminum fixtures and stick with solid cast brass when it comes to LED (or any outdoor lighting fixture).

See how much energy and money you can save by using LED. Use our LED Energy Savings Calculator.

VOLT® LED Max Spread Area Light Features:

-Solid cast brass construction

-Pre-aged brass finish.  There is no powder coating, paint or finish to wear off or peel—just the natural patina beauty of brass that does not corrode.

-Also available in raw copper. See VOLT's® LED Max Spread Copper Area Light.

-Solid brass or stainless steel components.

-Ceramic white paint under shade for maximum photometrics

-Choose from 48" standard or 25' 16G, SPT-2 premium tinned copper lead wire.

-The body is machine threaded and screws tight onto an oring for the ultimate moisture tight design.

-Adjustable shade moves up and down to change illumination results

-Beryllium copper socket – more corrosion resistant than copper.

-Silicon plug where lead wires exit fixture.  Prevents ground moisture and insects from entering fixture through the stem.

-Add 6", 12", or 24" extension rods to raise overall height and increase the illumination diameter.

-Low voltage 10-15 volts

-Requires VOLT's® Low Voltage Transformer (Sold seperately, click HERE to view)

-VOLT's® Lifetime Warranty

IMPORTANT *** All VOLT® LED fixtures and retrofit bulbs must be used with magnetic transformers such as our VOLT® transformers (they are not compatible with electronic transformers). They must be used with AC (they are not compatible with DC voltage). Failure to comply with any of these factors so will destroy the fixture or lamp and void the warranty.