Indoor LED Bulb Sale

  Home > LED Accessories & Tools >

  6", 12", 24" Solid Brass Extension Poles

 
Our business is built on reputation and referrals. Please help spread the word.

Solid brass extension riser.  Used to raise mounting height of outdoor lighting fixtures above plant material.  Also great for increasing stem height of path and area lights to increase illumination area.  Match seamlessly with our brass outdoor lighting path and area lights (same material, finish and thickness) 1" Diameter brass with 1/2" NPT male and female threading.  Comes in 6", 12" and 24" lengths.

Item# Item Name Retail Price Sale Price Qty Add
9R-BRASS-RISER-P-1 Solid Brass Extension Pole - 06" Bronze
$12.00
$8.97
9R-BRASS-RISER-P-2 Solid Brass Extension Pole - 12" Bronze
$14.00
$11.97
9R-BRASS-RISER-P-3 Solid Brass Extension Pole - 24" Bronze
$20.00
$17.97
Check the items you wish to purchase, then click


Product Instructions:
  • Very heavy 1" thick solid brass.




Average Customer Review: 3 of 5 | Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
Very solid May 27, 2013
Reviewer: yard lover from Shelbyville Il  
These are great to add just the right amount of additional height.  I used them to clear my daylilies.  Nice bronze finish perfect match to the Gentle Splash. A heavy duty extension not cheap in any way.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
6" extensions used to > area of lighting October 13, 2012
Reviewer: wjoyc from Lady Lake FL  
Found that the threads on the extension (just some) don't go all the way.  When you tighten it there is a gap left.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Some mis-match in color September 7, 2012
Reviewer: Mr. Marsh from Bay City Michi  
The 6" extensions worked perfectly

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Poor quality control October 24, 2011
Reviewer: reddog from Upper Midwest  
The threaded insert at the top of these extensions is glued in place with silicon caulk. If the adhesion breaks between this insert and the tube you can not secure the path light post to the riser.||Sometimes the cut end is left with sharp burrs.||The threads are not always cut all the way and the post will not butt tight to the top of the riser; there can be 1/8" or larger gap.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
No quality control October 5, 2011
Reviewer: waltoly from Olympia WA  
I added the 6" copper riser to four of my pathlights and ended up with a flush fit on only two of them. The other two had a 1/8" gap between the riser and light fixture. Quality and fit/finish was inconsistant from factory. They're a nice idea but with such low quality they're not worth the price -- unless you absolutly need them. Then they're priceless!

Was this review helpful to you?

(Your shopping cart is empty)
Built with Volusion
Choose Your Options
1 of 1